Filter
Top Products
8.
If it is necessary to replace the webcam/microphone module:
a. Remove the Phillips PM2.0×4.0 screw (1) that secures the webcam/microphone module to
the display bezel.
b. Release the webcam/microphone module (2) as far as the webcam/microphone module
allows.
c. Disconnect the webcam/microphone module cable (3) from the webcam/microphone
module.
d. Remove the webcam/microphone module. The webcam/microphone module is available
using spare part number 603779-001.
9. If it is necessary to replace the Bluetooth module:
a. Detach the Bluetooth module (1) from the display bezel. (The Bluetooth module is attached to
the display bezel using double-sided tape).
ENWW
Component replacement procedures
73