HP (Hewlett-Packard) 2610 Switch User Manual


 
56
Software Fixes in Release R.11.04 - R.11.25
Release R.11.14
TLB Miss: Virtual Addr=0x00263f14 IP=0x00263f14 Task='tHttpd' Task
ID=0x85d76e70 fp:0x00000000 sp:0x85d76d30 ra:0x00263f14 sr:0x1000fc01
Configuration (PR_1000786770) The switch may not reload as it should following an
update of the configuration file via SCP. Sometimes, portions of the copied config are written
to the running config. Event logs may show messages similar to the following.
I 01/01/90 20:49:34 ssh: scp session from 13.28.234.50
W 01/01/90 20:49:35 ssh: scp error: protocol error: unexpected <newline>
Release R.11.14
The following problemswere resolved in release R.11.14. (Not a public release.)
Enhancement (PR_0000000084) DHCP Option 66 enhancement added. For more
information, see “Release R.11.14 Enhancements” on page 34.
Enhancement (PR_0000004180) SSH enhancements added. For more information, see
“Release R.11.14 Enhancements” on page 34.
SSH (PR_0000003592) Repeatedly performing crypto key generation tasks, and then
connecting to the switch via SSH and executing a show ip ssh command may trigger a switch
crash with a message similar to the following.
TLB Miss: Virtual Addr=0x10385720 IP=0x10385720 Task='mSnmpCtrl'
Task ID=0x85cc0150 fp:0x85b93e60 sp:0x85cbff80 ra:0x10385720
sr:0x1000fc01
Release R.11.15
The following problems were resolved in release R.11.15. (Not a public release.)
Crash (PR_0000003933) — When the user attempts RADIUS authentication to the Web
Management Interface, the switch may crash with a message similar to the following.
TLB Miss: Virtual Addr=0x0024c904 IP=0x0024c904 Task='tHttpd'
Task ID=0x81e46eb0 fp:0x00000000 sp:0x81e46d70 ra:0x0024c904
sr:0x1000fc01
DHCP (PR_0000004092) — A ProCurve Switch 2610-48 running software version R.11.12
or greater drops DHCP packets across port banks when VLAN ID’s 1024-1279 are used. Port
banks are as follows: Bank 1: Ports 1-24; Bank 2: Ports 25-50. Workaround: Avoid use of VLAN
IDs 1024-1279.