Filter
Top Products
2
Downloading Software to the Switch
Downloading Software to the Switch
Caution
The startup-config file generated by the latest software release may not be backward-compatible with
the same file generated by earlier software releases.
HP periodically provides switch software updates through the ProCurve Networking Web site
http://www.procurve.com/software. After you acquire the new software file, you can use one of the
following methods for downloading it to the switch:
■ For a TFTP transfer from a server, do either of the following:
• Click on Download OS in the Main Menu of the switch’s menu interface and use the
(default) TFTP option.
•Use the copy tftp command in the switch’s CLI (see below).
■ For an Xmodem transfer from a PC or Unix workstation, do either of the following:
• Click on Download OS in the Main Menu of the switch’s menu interface and select the
Xmodem option.
•Use the copy xmodem command in the switch’s CLI (page 4).
■ Use the download utility in ProCurve Manager Plus.
■ A switch-to-switch file transfer
Note
Downloading new software does not change the current switch configuration. The switch configu-
ration is contained in a separate file that can also be transferred, for example, for archive purposes
or to be used in another switch of the same model.
This section describes how to use the CLI to download software to the switch. You can also use the
menu interface for software downloads.