HP (Hewlett-Packard) 4100TN Copier User Manual


 
EN
Overview
229
C
Printer memory and
expansion
Overview
The printer has three dual in-line memory module (DIMM) slots
for upgrading with:
more printer memoryDIMMs are available in 4, 8, 16, 32,
64, and 128 MB, for a maximum of 256 MB
flash memory DIMMsavailable in 2 and 4 MB; unlike
standard printer memory, flash DIMMs can be used to
permanently store downloaded items in the printer, even
when the printer is off
DIMM-based accessory fonts, macros, and patterns
other DIMM-based printer languages and printer options
Note
Single in-line memory modules (SIMMs) used on previous HP LaserJet
printers are not compatible with the printer.
You might want to add more memory to the printer if you often
print complex graphics or PS documents, print with the optional
duplexer, use many downloaded fonts, or print at ProRes 1200.
Added memory also gives you more flexibility in supporting job
retention features, such as quick copying.
The printer has two enhanced input/output (EIO) slots for
expanding the printers capabilities with:
a network card
a connectivity card for serial, USB, or AppleTalk
a mass storage device, such as a hard disk
For ordering information, see Ordering information on page 22.
To find out how much memory is installed in the printer, or to find
out what is installed in the EIO slots, print a configuration page
(see Configuration page on page 152).