Filter
Top Products
install the scanner
5
connect the TMA
If your scanner has a transparent materials adapter (TMA), it allows you to scan
35 mm slides or negatives.
1 Disconnect the power cable from the scanner.
2 On the back of the scanner, find the round TMA port:
– On the HP Scanjet 4500c and 5550c series scanners, the TMA port is
the second port from the left.
– On the HP Scanjet 4570c and 5500c series scanners, the TMA port is
the second port from the right.
3 Holding the TMA cable by its free end, align the connector so the arrow is
on the top side.
4 Gently insert the connector into the TMA port.
5 Reconnect the power cable.
TMA port
P_usermanual.book Page 5 Monday, May 6, 2002 6:26 PM