4
System Requirements
Windows NT Systems
The following items are required when you install the HP Fibre Channel
Adapter into a Windows NT system:
• A Pentium or higher system with PCI local bus
• Windows NT 4.0 installed with at least service pack 4
• Minimum recommended system memory is 32 MBytes
Windows 2000 Systems
The following items are required when you install the HP Fibre Channel
Adapter into a Windows 2000 system:
• A Pentium or higher system with PCI local bus
• Windows 2000 RTM installed
• Minimum recommended system memory is 64 MBytes
NetWare Systems
The following items are required when you install the HP Fibre Channel
Adapter into a Novell NetWare system:
• A Pentium or higher system with PCI local bus
• Novell NetWare 5 installed
• Minimum system memory of 32 MBytes