Filter
Top Products
19
Unloading the Driver
For removing or updating the driver, perform the following steps:
NOTE The old driver must be removed before installing the new one.
1. Confirm that there is no Fibre Channel activity occurring by dismountingthe
drive.
2. Switch to the Command Console
3. To dismount the drive,
Type:
Dismount volume_name <return>
NOTE The volume_name is the volume that the user has created. If more
than one volume needs to be dismounted, perform the dismount
command for each individual volume.
4. To remove the driver,
Type:
Unload AFCNW.HAM <return>
When thedriver is successfully removed, an acknowledgement from the system
displays the message:
driver unloaded
The controller card is now deactivated.
Updating the Driver
To update the driver, first perform the unload procedure, then the load procedure detailed
above.