Filter
Top Products
13
3 Windows NT Driver Installation
NOTE Check this worldwide web address to ensure that you have the latest
version of the Windows NT driver:
http://netserver.hp.com/netserver/
If it is a newer version than the one on the supplied HP Navigator CD,
download it and use it instead of the earlier driver.
Overview
Before installing the Fibre Channel Adapter driver, the Windows NT system
should be up and running.
The HP Navigator CD contains the fibre channel HBA drivers. You need to
create a driver diskette before driver installation. Follow these procedures to
create driver diskette:
• Insert the HP Navigator CD into the HP Netserver CD-ROM, and boot
the Netserver with the CD.
• On the main menu, select Netserver utilities, then select diskette
library.
• Select the “HP D8602B Fibre Channel HBA Winnt 4.0 support disk”.
• Insert a diskette into the floppy disk drive.
• Follow instructions on the screen to create driver diskette.
Installing the Driver
To install the Windows NT driver, perform the following steps:
1. Start Windows NT and log into an account with administrative privileges.
2. Insert the “HP D8602B Fibre Channel HBA Winnt 4.0 Support Disk” into
theflexiblediskettedrive.
3. From the Start bar, select Settings.