Filter
Top Products
14
4. From the Settings menu, select Control Panel.
5. From the Control Panel window, select SCSI Adapters.
6. From the SCSI Adapter window, select Drivers.
7. From the Drivers window, select Add.
8. Select Have Disk.
9. From the floppy disk drive (path, A:\WINNT), select Agilent PCI Fibre
Channel Controller (NT 4.0).
10. Press OK.
11. When the installation is complete, remove the diskette, shut down
Windows NT, and reboot the system to load the driver.
Removing the Driver
In certain situations you may need to remove the controller driver. Follow these
steps to remove the driver:
1. Start Windows NT and log into an account with administrative privileges.
2. From the Start bar, select Settings.
3. From the Settings menu, select Control Panel.
4. From the Control Panel screen, select SCSI Adapters.
5. From the SCSI Adapter window, select Drivers.
6. Select Agilent PCI Fibre Channel Controller (NT 4.0)
7. From the Drivers window, select Remove.
8. Click on Yes.
9. When you are finished, shut down Windows NT, and reboot the system to
remove the driver.