Filter
Top Products
15
4 Windows 2000Driver Installation
NOTE Check this worldwide web address to ensure that you have the latest
version of the Windows 2000 driver:
http://netserver.hp.com/netserver/
If it is a newer version than the one on the supplied HP Navigator CD,
download it and use it instead of the earlier driver.
Overview
Before installing the Fibre Channel Adapter driver, the Windows 2000 system
should be up and running.
The HP Navigator CD contains the fibre channel HBA drivers. You need to
create a driver diskette before driver installation. Follow these procedures to
create driver diskette:
• Insert the HP Navigator CD into the HP Netserver CD ROM drive, and
boot the Netserver with the CD.
• On the main menu, select Netserver utilities, then select diskette
library.
• Select the “HP D8602B Fibre Channel HBA Win2K support disk”.
• Insert a diskette into the floppy disk drive.
• Follow instructions on the screen to create driver diskette.
Installing the Driver
The AFCW2K.SYS miniport driver installation is done through the standard
Windows 2000 PnP driver installation. Miniport driver installation can be done
multiple ways: using the Windows 2000 PnP hardware detection, Hardware
Wizard, Device Manager, etc.
Follow the instruction indicated by Windows 2000 “Found New Hardware”
Wizard and specify “Floppy disk drive” when selecting the search location for
the driver.