Filter
Top Products
17
5 NetWare Driver Loading
NOTE Check this worldwide web address to ensure that you have the latest
version of the NetWare driver:
http://netserver.hp.com/netserver/
If it is a newer version than the one on the supplied HP Navigator CD,
download it and use it instead of the earlier version.
Overview
Before loading the HP NetWare Fibre Channel Adapter driver, verify that the
programs “NWPA.NLM” and “SCSIHD.CDM” are loaded on your system. In
most cases, these programs exist on your system if it is running NetWare 5.
The HP Navigator CD contains the fibre channel HBA drivers.
• You need to create a driver diskette before driver installation. Follow
these procedures to create driver diskette:
• Insert the HP Navigator CD into the HP Netserver CD-ROM and boot
the Netserver with the CD.
• On the main menu, select Netserver utilities, then select diskette
library.
• Select the “HP D8602B Fibre Channel HBA NetWare 5.x support
disk”.
• Insert a diskette into the floppy disk drive.
• Follow instructions on the screen to create driver diskette.
Driver Loading on an Existing NetWare Server
To install the driver, perform the following steps:
1. Insert the HP Fibre Channel Driver Diskette for Novell NetWare 5.x into the
floppy drive.