Filter
Top Products
Removal and replacement procedures 46
Fan cage
To remove the component:
1. Power down the server (on page 25).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 27, "Extend the
server from the rack" on page 26).
3. Remove the access panel ("Access panel" on page 30).
4. Remove the PCI riser cage ("PCI riser cage" on page 32).
5. Remove the air baffle ("Air baffle" on page 31).
6. Remove the fan blanks.
7. Remove the fans ("Hot-plug fan" on page 39).
8. Remove the fan cage.