Filter
Top Products
Removal and replacement procedures 71
System board
To remove the component:
1. Power down the server (on page 25).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 27, "Extend the
server from the rack" on page 26).
3. Remove all power supplies ("Hot-plug power supply" on page 35).
4. Remove the access panel ("Access panel" on page 30).
5. Remove the PCI riser cage ("PCI riser cage" on page 32).
6. Remove the battery pack ("Removing the battery pack" on page 49).
7. Remove the air baffle ("Air baffle" on page 31).
8. Remove all DIMMs ("DIMMs" on page 68).
9. Remove the hot-plug fans ("Hot-plug fan" on page 39).
10. Remove the fan cage ("Fan cage" on page 46).
11. Remove the power supply backplane ("Power supply backplane" on page 38).
12. Disconnect all cables connected to the system board.
13. Open the heatsink retainer bracket.