Filter
Top Products
Removal and replacement procedures 78
9.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
10. Install the heatsink.
IMPORTANT: Install all components with the same configuration that was used on the failed
system board.
11. Install all components removed from the failed system board.
12. Install the access panel ("Access panel" on page 30).
13. Install the power supplies ("Hot-plug power supply" on page 35).
14. Power up the server.
After you replace the system board, you must re-enter the server serial number and the product ID.
1. During the server startup sequence, press the F9 key to access RBSU.
2. Select the Advanced Options menu.
3. Select Service Options.
4. Select Serial Number. The following warnings appear: