Filter
Top Products
Removal and replacement procedures 59
4.
Close and lock the heatsink retaining latches.
5. Install the air baffle ("Air baffle" on page 31).
6. If the PCI riser cage was removed, install the PCI riser cage ("PCI riser cage" on page 32).
7. Install the access panel ("Access panel" on page 30).
8. Install the server into the rack.
9. Power up the server.
Power supply cage assembly
To remove the component:
1. Power down the server (on page 25).
2. Access the product rear panel (on page 27).
3. Remove all power supplies ("Hot-plug power supply" on page 35).
4. Remove the server from the rack (on page 27).
5. Remove the access panel ("Access panel" on page 30).
6. Remove the PCI riser cage ("PCI riser cage" on page 32).
7. Remove the air baffle ("Air baffle" on page 31).
8. Remove the power supply backplane ("Power supply backplane" on page 38).
9. Loosen the system board thumbscrews, and then slide the system board assembly forward.