Filter
Top Products
Removal and replacement procedures 57
To replace the component, reverse the removal procedure.
Heatsink
To remove the heatsink:
1. Power down the server (on page 25).
2. Extend the server from the rack (on page 26).
3. Remove the access panel ("Access panel" on page 30).
4. If full-length expansion boards are installed, remove the PCI riser cage ("PCI riser cage" on page 32).
5. Remove the air baffle ("Air baffle" on page 31).
6. Open the heatsink retaining bracket.
7. Remove the heatsink.