Filter
Top Products
10
Installing Accessories in the New Desktop Package
Replacing the Pentium II
Processor
The Pentium II processor is contained on a module which is installed in a
socket on the system board. It is held in place by a bracket. There are two
plastic clips, one on the top of each pillar of the bracket, to prevent the
processor module from slipping out.
To remove the old processor module:
1 Press the two plastic clips towards each other.
2 Carefully pull the processor module away from its connector on the
system board.
The heat-sink is supplied with the processor, and is bolted to it by the
manufacturer.
Plastic clips
Heat-sink
Bracket pillars
1book.bk : 1ch01.fb4 Page 10 Wednesday, April 30, 1997 3:36 PM