Filter
Top Products
15
Complete the Questionnaire to Check Your Understanding
4 The client is unable to obtain the performance that is expected from a
hard disk drive. What would you suggest might be the problem?
a The drive has been installed in the slave position of the primary IDE
cable.
b The drive has been installed on the secondary IDE cable.
c The jumpers on the drive have not been set correctly.
d The drive has not been correctly detected by the Setup program, and
needs to be configured manually.
5 The client is unable to start the PC from the keyboard. What would you
suggest might be the problem?
a The PC is not plugged in.
b The Keyboard-Power-On function has not be enabled in the Setup
program.
c The Keyboard-Power-On function has not be enabled on the system
board switches.
d The Keyboard-Power-On function has not be enabled in
Display
Properties
menu of the operating system.
e The PC is running the wrong operating system for this function.
1book.bk : 1ch01.fb4 Page 15 Wednesday, April 30, 1997 3:36 PM