Filter
Top Products
7
Installing Accessories in the New Desktop Package
Installing an Accessory
Board
Installing an ISA board on
the rear of the backplane
1. Unscrew the retaining
bracket
2. Remove the slot cover
3. Slide the board into the slot
5. Replace the retaining
bracket.
4. Slide it horizontally out
1. Unscrew the retain-
ing bracket at the rear
of the computer
2. Remove the rear tray by sliding it forward about
1.5 cm (1/2 inch), and lifting it up and out.
Access is then clear for installing a short ISA board
in the slot on the rear side of the backplane.
1book.bk : 1ch01.fb4 Page 7 Wednesday, April 30, 1997 3:36 PM