Filter
Top Products
17
Answers and Explanations
4 The client is unable to obtain the performance that is expected from a
hard disk drive. What would you suggest might be the problem?
a The drive has been installed in the slave position of the primary IDE
cable.
b The drive has been installed on the secondary IDE cable.
c The jumpers on the drive have not been set correctly.
d The drive has not been correctly detected by the Setup program, and
needs to be configured manually.
The correct answer to this question is, “all of the above”. Response (d) is
unlikely to be the case, but is worth checking for the information that it
can yield.
5 The client is unable to start the PC from the keyboard. What would you
suggest might be the problem?
a The PC is not plugged in.
b The Keyboard-Power-On function has not be enabled in the Setup
program.
c The Keyboard-Power-On function has not be enabled on the system
board switches.
The function works with any operating system, and is not configured on
any particular Windows menu.
1book.bk : 1ch01.fb4 Page 17 Wednesday, April 30, 1997 3:36 PM