Filter
Top Products
A-35
The Boot Console Interface
Displaying and Setting the VME Chassis Codes Mode Flag
Displaying and Setting the VME Chassis Codes Mode
Flag
On the VME menu, ModeFlags is used to display or set flags which enable
or disable the display of diagnostic chassis codes on SERIAL_1.
To display the current setting of the mode flag enter the following command:
VME Menu: Enter command > mf
The information is displayed similar to the following example
Diagnostic Chassis Codes to SERIAL_1: ENABLED
VME Menu: Enter command >
Use the following syntax to set the VME chassis code mode flag:
ModeFlags - Shows current state of all mode flags
ModeFlags cc on - Enables the display of diagnostic chassis codes
on SERIAL_1
ModeFlags cc off - Disables the display of diagnostic chassis codes
on SERIAL_1