Filter
Top Products
53
Hard Disk Drive
(End User Replaceable)
Required Equipment
• Torx #6 screwdriver
Removal Procedure
1. Exit all applications, including Windows.
2. Turn the OmniBook off and remove the battery and ac adapter.
3. Use a Torx-T6 screwdriver to remove the two keyboard screws and the three hard drive
screws (the exact location of the hard drive screws vary with the manufacturer of hard drive).
See Figure 19.
4. Turn the OmniBook over and open the cover. Grasp the top edge of the Keyboard and fold
out gently. Note – the Keyboard Flex Cables do not need to be disconnected. See Figure
20 on page 54.
CAUTION:
To avoid damage due to keyboard flex cables, do not pull the cables out of
the connectors or pick up the OmniBook while the keyboard is still
connected.
Figure 19 - Hard Drive Screws
Hard Drive Screws
M3.0x0.5x5.0mm
1.5 - 3.5 in-lb
(p/n 0515-2847)
Keyboard Screws
M2.0x0.4x7.0mm
1.5-3.5 in-lb
(p/n 0515-2846)