Filter
Top Products
( 27
User self-registration
enabled
Permission for users to create their own user profile. If disabled,
only the administrator can add or change user profiles.
Network Menu
IP Configurati o To specify how the digital sender network interface car
obtains its TCP/IP configuration. Choices
●
MANUAL. From the control panel.
●
BOOTP (Boot Protocol) or DHCP (Dynamic Host Configuration
Protocol). Automatically from the network (the IP Address, IP Subnet
Mask, and IP Gateway parameters are ignored). A corresponding server
must be running and properly configured. The next time you open the
configuration menu, you see the values that the network interface card
automatically discovered. See “
Assigning an IP address to the digital
sender” on page 17 for details.
Two things happen if you configured the IP address using
BOOTP or DHCP and later change the IP address at the control
panel: (1) the IP address that was assigned is released and (2)
the setting for this parameter changes to MANUAL.
Changing this value causes the digital sender to shut down and
restart.
IP Address Unique TCP/IP network address of the HPJetDirect print server
(network interface card) in the digital sender. Required for the
digital sender to work.
C
LEAR
sets the address to 0.0.0.0.
Changing this value causes the digital sender to shut down and
restart.
IP Subnet Ma s The filter used to identify the subnet of the network interface
card in the digital sender.
C
LEAR
sets the address to 0.0.0.0.
Changing this value causes the digital sender to shut down and
restart.
IP Gateway IP address of the gateway server used to send packets off the
local network.
C
LEAR
sets the address to 0.0.0.0.
Changing this value causes the digital sender to shut down and
restart.
Configuration parameters on the control panel (continued)
Parameter Description