Filter
Top Products
+%!! 59
The LDAP server is currently
unreachable. Contact the
administrator
There is a problem with either
the LDAP server or the
network.
●
Try again later.
●
Check that all cabling is securely connected.
●
Using the Network and E-mail configuration
menus, make sure you have correctly configured all
TCP/IP addresses, the LDAP server name, and
(optionally) the LDAP port number.
●
If you use symbolic names, make sure you have
correctly configured a DNS or WINS server in the
Network configuration menu.
●
Check that the network is working correctly using a
network command such as ping.
●
Check with the LDAP server administrator to mak
sure the LDAP server is running.
●
Check that the network is properly configured.
●
If the problem persists, contact HPcustomer
support.
Network error code . There is a problem with the
network interface card.
●
Turn the digital sender off and then back on.
●
Check the TCP/IP status parameter on the Revision
page. If it displays
R EAD
, try reaching the digital
sender using a network command such as ping. If it
displays
ERROR
, note the codes and contact
HPcustomer support.
No matches found . There is no entry in the LDAP
directory that matches your
search string and search
criteria.
●
Check the accuracy of your search string and search
criteria.
Object not found. Check your
configuratio n
Either the search root or the
name/password combination
for authenticating searches in
the LDAP server is incorrect.
●
Use the E-mail configuration menu at the control
panel to correct the search root or name/password
combination.
Partial results. Check your
configuratio n
The search root for searches
in the LDAP server is
incorrect.
●
Use the E-mail configuration menu at the control
panel to correct the search root.
Passwords do not match.
Press any key to retry.
During the procedure to
change password, the
confirming password that was
entered did not match the
first password.
●
Try again.
Control panel messages (continued
Message Description Actions