Filter
Top Products
36
(!4,0
(
The Tasks page lists the services running on the digital sender at that moment. Each task
is assigned a Status, Error Number (Errno), and State (St). Tasks cannot be modified or
deleted and are diagnostic tools that may be referred to by HPTechnical Support staff.
%$!
1 At the control panel, press S
TATUS
(A
LT
+F3).
2 Press T
ASKS
(F2).
Log Server Addr. IP address of the host computer that receives syslog messages from the
HPJetDirect print server.
HPJetDirect Cfg. Indicates how the digital sender has received its TCP/IP configuration:
●
DHCP
Automatically from a DHCP server
●
MANUAL
Manually from entries made at the control panel.
HPJetDirect Timeou Timeout value in seconds that an idle data connection is allowed to remain
open. Valid values are 0 to 3600. A value of 0 disables the timeout mechanism.
The default is 90 seconds.
HPJetDirect ID HP manufacturing identification code assigned to the network interface card.
Boot Block Ver . Version of the digital sender startup (boot) program. This information is used
only by HP manufacturing and HP customer support.
Multi-Boot Ver . Version of the digital sender multi-boot program. This information is used only
by HP manufacturing and HP customer support.
Engine FW Ver. Version of firmware used by the digital sender scanner engine. This information
is used only by HP manufacturing and HP customer support.
Running Imag e The firmware image currently running. Either 1 or 2.
Revision page parameters (continued)
Parameter Descriptions