Filter
Top Products
Installing the A5150A Adapter
Connecting the SCSI Peripherals
Chapter 2 27
Connecting the SCSI Peripherals
All external SCSI bus connections to the A5150A host bus adapter are
made with shielded, 68-conductor cables. The connectors on this cable
are always keyed to ensure proper mating.
Some internal cables come with 16bit SE/LVD on one end. This end
should be farthest from the host bus adapter.
Figure 2-1 SCSI Cable
Making External SCSI Bus Connections
Step 1. To connect external SCSI devices to the A5150A host bus adapter, plug
the 68-pin VHDCI connector on one end of a shielded external high
density SCSI cable into the host bus adapter connector J2 or J3.
This connector is now bracketed onto the back panel of the system.
Step 2. Plug the 68-pin connector on the other end of the shielded external SCSI
cable into the SCSI connector on your external SCSI device.
HD SCSI
VHDCI SCSI
SCSI Cable for External Connections
68-pin VHDCI