Filter
Top Products
Installing the A5150A Adapter
Verifying Installation
Chapter 2 37
Verifying Installation
After installing the adapter and attaching peripheral devices, verify that
all components are working. Refer to your system documentation for
information on verifying operation.
HP 9000
Step 1. To verify that the adapter is correctly installed, execute the following
command:
ioscan -f
The ioscan output could look like this:
ext_bus 0 0/0/0 c720 CLAIMED INTERFACE Ultra 2 wide SCSI
The third column represents the hardware path of the slot the adapter is
installed in. For information about the ioscan command, refer to your
operating system reference manual or the ioscan man page.
Step 2. Verify that the adapter and driver display.
Step 3. Verify that the devices you attached to the adapter display.