Filter
Top Products
Installing the A5150A Adapter
Verifying Installation
Chapter 238
HP e3000 Assume an N-Class system with an I/O card being added to slot #12, we
will expect paths 1/0/0/0 and 1/0/0/1 to be returned for our card.
Step 1. From BCH menus:
------------------------------------------------------
-Command Description
------- -----------
ALL Display all system information
...
IO Display I/O interface information
...
--------------------------------------------------
Information Menu: Enter command > io
I/O MODULE INFORMATION
Path Slot IODC
Type (dec) Number HVERSION SVERSION Vers
---- ----- ------ -------- -------- ----
System bus adapter 0 0x8030 0xc10 0x0
Local bus adapter 0/0 Built_In 0x7820 0xa00 0x0
Local bus adapter
...
Local bus adapter 1/0 12 0x7820 0xa00 0x0
...
PCI DEVICE INFORMATION
Path Vendor Device Bus Slot
Description (dec) Id Id # #
----------- ----- ---- ---- --- ---
Ethernet cntlr 0/0/0/0 0x1011 0x19 0 Built_In
SCSI bus cntlr 0/0/1/0 0x1000 0xc 0 Built_In
SCSI bus cntlr 0/0/2/0 0x1000 0xf 0 Built_In
SCSI bus cntlr 0/0/2/1 0x1000 0xf 0 Built_In
Comp. ser cntlr 0/0/4/0 0x103c 0x1048 0 Built_In
Comp. ser cntlr 0/0/5/0 0x103c 0x1048 0 Built_In
SCSI bus cntlr 1/0/0/0 0x1000 0xf 128 12
SCSI bus cntlr 1/0/0/1 0x1000 0xb 128 12
Information Menu: Enter command >main
Main Menu: Enter command or menu > sea 1/0/0/0
Searching for potential boot device(s) - on Path 1/0/0/0
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------
P0 1/0/0/0.6 intscsia.6 Random access media
Main Menu: Enter command or menu >