Filter
Top Products
Installing the A5150A Adapter
SCSI Bus Termination
Chapter 236
The peripheral device SCSI IDs are usually set with jumpers or a switch
on the peripheral. Refer to the peripheral manufacturer’s instructions to
determine the ID of each device and how to change it (via BCH for
N-Class systems). You must have no duplication of SCSI IDs on a SCSI
bus.
Step 1. Determine the SCSI ID required for each device on the SCSI bus.
Step 2. Make any necessary changes to the SCSI IDs and record the IDs for
future reference. You may use the following table.
Table 2-4 Record of SCSI IDs
SCSI ID SCSI Device Channel A SCSI Device Channel B
15
14
13
12
11
10
9
8
7 Adapter (default) Adapter (default)
6
5
4
3
2
1
0