Filter
Top Products
BASIC SETTINGSSCREEN MENUS
BASIC
OPERATION
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS CONNECTION
ADVANCED
SETTINGS
25
ENGLISH
3.
The following screen is displayed on the monitor
that is connected to the unit.
MAIN MENU
1.INPUT SETUP
2.SPKR SETUP
3.SURR SETUP LOCKED
4.VIDEO SETUP
5.PREFERENCE UNLOCK
6.ACOUSTIC EQ.
7.NETWORK
EXIT
Press the 3 / 4 buttons to select 7. NETWORK
and press the ENTER button.
4.
The NETWORK SETUP screen opens.
Select the item that you want to set using the 3
/ 4 buttons, and change the selection using the
1 / 2 buttons.
VIDEO :NTSC
RESOLUTION :480/576i
SCREEN SAVER:ON
RETURN EXIT
7.NETWORK SETUP
Note:
Settings cannot be changed if the top menu of the
NETWORK screen is not displayed.
In such cases, a warning message is displayed on the
bottom of the screen. Return the NETWORK screen
to the top menu.
Close the OSD menu and press the GUIDE button to
return the NETWORK screen to the top menu.
VIDEO :NTSC
RESOLUTION :480/576i
SCREEN SAVER:ON
TOP PAGE OF [NETWORK]
HAS TO BE SELECTED.
RETURN EXIT
7.NETWORK SETUP
VIDEO
The color system of this unit is NTSC.
RESOLUTION
Use the 1 / 2 cursor buttons to select video signal
resolution (pixel count) on the NETWORK PLAYER
from the following options.
“480/576i” Ô “480/576p” Ô “720p” Ô “1080i” Ô
“AUTO” Ô “480/576i”
• AUTO (default) :
Sets an appropriate resolution for a television that
is connected using HDMI.
(If the unit is not connected to the television using
HDMI, the output is 480i/576i)
(If connected by converting to DVI, the output is
480p/576p)
• 480/576i :
The output is 480i/576i.
• 480/576p :
The output is 480p/576p.
• 720p :
The output is 720p.
• 1080i :
The output is 1080i.
Notes:
• If a monitor connected using HDMI is changed during
the AUTO setting, the screen returns automatically to
the top menu and the resolution is changed to one that
is appropriate for the monitor. If a dialog box or the
TOOL menu is displayed at this time, the resolution
is changed after the dialog box or TOOL menu is
closed.
• Set 480i/576i if you are using VIDEO/S-VIDEO
output.
• If you are using a monitor connected using HDMI,
and the signal is being input from the network, the
video signal is output in the resolution that was set
in RESOLUTION.
SCREEN SAVER
Use the 1 / 2 cursor buttons to select “ON” or “OFF”
for the screen saver from the video signal that is
output from the unit.
• ON (default) :
If no operation is made for 10 minutes on the
NETWORK screen or SETTING screen, the
screen saver is activated on the monitor. (The
screen goes dark)
• OFF :
The screen saver is not activated even if no
operation is made for 10 minutes.
Note:
The screen saver is not activated during photo display
or video playback.