Filter
Top Products
P
RINTING
F
ROM
DOS A
PPLICATIONS
A.2
About the Remote Control Panel
DOS users have access to many printer features through specific
DOS printer drivers; however, many software manufactures do not
develop printer drivers for their software programmes. Your printer
provides the software control panel for improved printer control
when DOS printer drivers are not available or when certain print
settings are not available through DOS software programmes.
N
OTE
:
The printer’s Remote Control Panel is not a printer driver.
It should be used to set print settings that are not available
through DOS software programmes. Printer drivers are supplied by
the manufacturers of your DOS software programmes. If your DOS
software Programme does not include a printer driver for your
printer, contact the manufacturer of the software or use one of the
alternate printer drivers.
Installing the Remote Control Panel
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an maintenance
window appears.
If the maintenance window does not appear, click
Start
and
then
Run
. Type
X:\Setup.exe
, replacing “
X
” with the
letter of your drive and click
OK
.
2
Click
Next
.
3
Select
Custom installation
. Click
Next
.
4
Select your printer and click
Next
.
N
OTE
s
: If your printer is not already connected to the computer, the
following window will appear.
• After connecting the printer, click
Next
.
• If you don’t want to connect the printer at this time, click
Next
,
and
No
on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.