Filter
Top Products
U
SING
P
RINT
M
ATERIALS
3.12
Using the Manual Feed Mode
If you select
Manual Feed
in the
Source
option when changing
print settings, you can manually load a sheet of print material in the
Multi-Purpose Tray. Manually loading paper can be helpful when you
want to check the print quality after each page is printed.
This loading procedure is almost the same as the procedure for
loading in the Multi-Purpose Tray, except you load paper sheet-
by-sheet in the Tray, send print data to print the first page, and
press the
Cancel
button on the control panel to print each
following page.
1
Load a sheet of print material on the centre of the Multi-
Purpose Tray
with the print side up
.
2
Slide the paper width guide and adjust it against the
material without bending.