![](http://pdfasset.owneriq.net/d/07/d079714b-e413-459d-9c8d-7f005d7c630f/d079714b-e413-459d-9c8d-7f005d7c630f-bgc7.png)
Lower Cassette Pickup Motor Removal
1 Open the sensor cover and disconnect the center and rear
connectors (see Figure 6-37, callout 2).
2 Release the (2) tabs that hold the Upper Front Cover (access
the tabs through the slots with a small screwdriver - see
Figure 6-38 callout 1). Remove the cover by rotating it toward
the front.
3 Remove the (2) screws from the front and rear left side (see
Figure 6-38 callout 2).
4 Remove the cables from the race channel at the front of the
Lower Cassette Base (see Figure 6-37).
Note
Note how the cables are routed in the the cable
race. Be careful not to damage the cables during
reassembly.
(continued on next page)
Figure 1-38 Lower Cassette Upper Front Cover
6-45 Removal and Replacement