![](http://pdfasset.owneriq.net/d/07/d079714b-e413-459d-9c8d-7f005d7c630f/d079714b-e413-459d-9c8d-7f005d7c630f-bg175.png)
Removing the Paper Roller
1 Remove the (1) screw below the Switchback Solenoid Arm on
the gear side as shown in Figure A-13, callout 1.
2 Remove the sensor, squeezing the tabs on the underside of the
sensor (see Figure A-13, callout 2).
(continued on next page)
Figure A-13 Solenoid Arm
Duplexer A -17