Filter
Top Products
Remove ink from your skin and clothing
Follow these instructions to remove ink from your skin and clothing:
Surface Remedy
Skin Wash the area with an abrasive soap.
White fabric Wash the fabric in cold water and use chlorine bleach.
Color fabric Wash the fabric in cold water and use sudsy ammonia.
CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can
set the ink into the fabric.
Reduce energy consumption when the HP All-in-One is off
When the HP All-in-One is off, an amount of energy is still being consumed. Energy
consumption can be lessened by enabling the Standby/Off state.
NOTE: When the HP All-in-One is in the Standby/Off state, it will take longer than
usual to turn back on.
To enable the Standby/Off state
▲ Press and hold the On button for 3 seconds until the HP All-in-One turns off.
Self-maintenance sounds
The HP All-in-One will make mechanical noises at various times to perform periodic
maintenance functions, such as replenishing the ink levels in the print head assembly or
cleaning the print head. This is normal operation and is necessary to ensure the HP All-
in-One produces the best quality printouts.
CAUTION: A message on the display will notify you when the HP All-in-One is
performing maintenance functions. Do not remove power from the device during this
time.
Turn off the HP All-in-One
To avoid damaging the HP All-in-One, you must properly shut it down by using the On
button located on the device. Do not turn the HP All-in-One off by unplugging the power
cord or turning off a power strip.
Chapter 12
106 Maintain the HP All-in-One
Maintain the HP All-in-One