Filter
Top Products
8 Use the photo features
The HP All-in-One is equipped with memory card slots and a front USB port that enable
you to print or edit photos from a memory card or storage device (such as a keychain
drive, portable hard drive, or a digital camera in storage mode) without uploading your
photos to a computer first. Additionally, if the HP All-in-One is network-connected or
connected to a computer with a USB cable, you can also transfer your photos to the
computer to print, edit, or share.
You can print photos by connecting a PictBridge-compatible digital camera directly to the
front USB port. When you print from a digital camera, the printer uses the settings that
you selected on the camera. For more information, see the documentation that came with
the camera.
This section contains the following topics:
•
Insert a memory card
•
Print photos
•
Create special projects from your photos
•
Save photos to your computer
•
Edit photos using the control panel
Insert a memory card
The HP All-in-One supports memory cards and storage devices as described below. Each
type of memory card can only be inserted in the appropriate slot for that card, and only
one card or a storage device may be inserted at a time.
CAUTION: Do not insert more than one memory card or a storage device at a time.
If more than one memory card is inserted, or if a storage device is connected when
a memory card is inserted, unrecoverable data loss might occur.
Insert a memory card 93
Photos