Filter
Top Products
Item Sub-item Sub-item Values Description
DHCP RENEW YES
NO*
Specify whether the print server requests to
renew the DHCP lease.
NOTE: This menu appears if the CONFIG
METHOD menu is set to the DHCP option
and a DHCP lease for the print server exists.
PRIMARY DNS Specify the IP address (n.n.n.n) of a Primary
DNS Server.
SECONDARY DNS Specify the IP address (n.n.n.n) of a
Secondary Domain Name System (DNS)
Server.
IPV6 SETTINGS ENABLE ON*
OFF
Enable or disable IPv6 operation on the print
server.
ADDRESS MANUAL
SETTINGS
●
ENABLE
●
ADDRESS
Enable and manually configure a TCP/IPv6
address.
ENABLE: Choose ON to enable manual
configuration, or OFF to disable manual
configuration. The default is OFF.
ADDRESS: Type a 32 hexadecimal digit IPv6
node address that uses the colon
hexadecimal syntax.
DHCPV6 POLICY ROUTER
SPECIFIED*
ROUTER
UNAVAILABLE
ALWAYS
ROUTER SPECIFIED: The stateful auto-
configuration method to be used by the print
server is determined by a router. The router
specifies whether the print server obtains its
address, its configuration information, or both
from a DHCPv6 server.
ROUTER UNAVAILABLE: If a router is not
available, the print server should attempt to
obtain its stateful configuration from a
DHCPv6 server.
ALWAYS: Whether or not a router is
available, the print server always attempts to
obtain its stateful configuration from a
DHCPv6 server.
PRIMARY DNS Specify an IPv6 address for a primary DNS
server that the print server should use.
SECONDARY DNS Specify an IPv6 address for a secondary DNS
server that the print server should use.
32 Chapter 2 Control panel ENWW