Filter
Top Products
Table 2-7 Event-log messages (continued)
Event code Description
59.3000 Fuser motor startup error
59.4000 Fuser motor error
59.5000 Image drum motor startup error—black
59.5300 Image drum motor startup error—yellow
59.6000 Image drum motor rotation error—black
59.6300 Image drum motor rotation error—yellow
59.7000 Black developer motor startup error
59.7300 Yellow developer motor startup error
59.8000 Black developer motor rotation error
59.8300 Yellow developer motor rotation error
59.9000 ITB motor start error
Table 2-8 Event-log-only messages
Event code Description Solution
20.0000 Memory out 1. Turn off the power by using the power switch, and then wait at least 30
seconds.
2. Turn on the power and wait for the product to initialize.
If the error persists, break the job into smaller jobs that contain fewer pages.
If the error persists, update the firmware.
NOTE: For memory-card models, adding memory to the DIMM slot might
help solve this problem.
54.0100 Environmental sensor error Verify that the DC controller connectors are firmly connected.
If the error persists, replace the temperature/humidity sensor.
If the error persists, replace the DC controller.
178 Chapter 2 Solve problems ENWW