HP (Hewlett-Packard) DV6-3225DX Laptop User Manual


 
9 Memory modules
The computer has one memory module compartment, which is located on the bottom of the
computer. The memory capacity of the computer is upgraded by adding a memory module to the
vacant expansion memory module slot or by upgrading the existing memory module in the primary
memory module slot.
WARNING! To reduce the risk of electric shock and damage to the equipment, disconnect the
power cord and remove all batteries before installing a memory module.
CAUTION: Electrostatic discharge (ESD) damages electronic components. Before beginning any
procedure, be sure that you are discharged of static electricity by touching a grounded metal object.
NOTE: To use a dual-channel configuration when adding a second memory module, be sure that
both memory modules are the same size.
To add or replace a memory module:
1. Save your work.
2. Shut down the computer, and close the display.
If you are not sure whether the computer is off or in Hibernation, turn on the computer by
pressing the Power button, and then shut down the computer through the operating system.
3. Disconnect all external devices connected to the computer.
4. Disconnect the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery from the computer.
7. Remove the four memory module compartment screws (1).
75