Filter
Top Products
Restoring default settings in Setup Utility
To restore Setup Utility default settings:
NOTE: If Setup Utility is running, begin at step 1. If Setup Utility is not running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. When the “Press the ESC key for
Startup Menu” appears, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the “Press the ESC key for
Startup Menu” message appears, press the esc key. When the Startup Menu appears, press the
f10 key.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press the enter key.
3.
When the Setup Confirmation appears, press the enter key.
4. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the enter key.
Setup Utility default settings go into effect when the computer restarts.
NOTE: Your password, security, and language settings are not changed when you restore the factory
default settings.
Exiting Setup Utility
Exit Setup Utility with or without saving changes.
●
To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press the esc key to return to the menu display. Use the
arrow keys to select Exit > Exit Saving Changes, and then press the enter key.
●
To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press the esc key to return to the menu display. Use the
arrow keys to select Exit > Exit Discarding Changes, and then press the enter key.
After either choice, the computer restarts in Windows.
Using Setup Utility
91