Filter
Top Products
Memory module
Description Spare part number
4-GB (PC3, 10600, 1333-MHz) 599092-001
2-GB (PC3, 10600, 1333-MHz) 598856-001
1-GB (PC3, 10600, 1333-MHz) 598859-001
Before removing a memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 43).
5.
Remove the accessory cover (see
Hard drive on page 44).
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install a memory module.
48 Chapter 4 Removal and replacement procedures