Filter
Top Products
Speakers
Description Spare part number
Speakers (include cable) 603694-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 43), and then remove the following components:
a.
Hard drive (see
Hard drive on page 44)
b.
Optical drive (see
Optical drive on page 51)
c.
Keyboard (see
Keyboard on page 53)
d.
Top cover (see
Top cover on page 56)
e.
Display assembly (see
Display assembly on page 65)
f.
System board (see
System board on page 76)
Remove the speakers:
1. Release the speaker cables from the clips (1) built into the base enclosure.
2. Remove the three Phillips PM2.5×6.0 screws (2) that secure the speakers to the base enclosure.
86 Chapter 4 Removal and replacement procedures