Filter
Top Products
Solid-state drive
Description Spare part number
128-GB mSATA solid-state drive (SSD), MLC 727514-001
128-GB SSD, TLC 747210-001
24-GB mSATA solid-state drive (SSD) 734247-001
Before removing the SSD, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
Service cover on page 37).
5. Disconnect the battery cable (see
Battery on page 39).
Remove the solid-state drive:
1. Remove the Phillips PM2.0×2.0 screw (1) that secures the solid-state drive to the computer. The
drive tilts upwards.
40 Chapter 4 Removal and replacement procedures