Filter
Top Products
RJ-45 module cover
Description Spare part number
RJ-45 module cover (black) 729606-001
RJ-45 module cover (red) 733475-001
Before removing the RJ-45 module cover:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
Service cover on page 37).
5. Remove the battery (see
Battery on page 39).
Remove the RJ-45 module cover:
1. Remove the power connector cable and the antenna cables from the clip built into the side of the
RJ-45 module cover.
2. Remove the 2 Phillips PM2.5×5.5 screws that secure the RJ-45 module cover (1) to the computer.
3. Remove the cover (2) from the computer.
Reverse this procedure to install the RJ-45 module cover.
Component replacement procedures
49