Filter
Top Products
Hard drive
Description Spare part number
1-TB, 5400 rpm, 2.5 in 676521-001
1-TB, 5400 rpm, 2.5 in, hybrid (8-GB integrated flash memory) 731999-001
750-GB, 5400 rpm, 2.5 in 634250-001
750-GB, 5400 rpm, 2.5 in, hybrid (8-GB integrated flash memory) 732001-001
500-GB, 5400 rpm, 7 mm 683802-001
500-GB, 5400 rpm, 7 mm, hybrid (8-GB integrated flash memory) 732000-001
Hard Drive Hardware Kit (includes left and right brackets, hard drive cable, and screws) 741683-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
Service cover on page 37).
5. Disconnect the battery cable (see
Battery on page 39).
Remove the hard drive:
1. Remove the 4 Phillips PM2.5×3.5 screws (1) that secure the hard drive to the computer.
2. Lift the hard drive enough to gain access to the hard drive connector cable (2)
42 Chapter 4 Removal and replacement procedures