Filter
Top Products
6. Slide the keyboard shield back slightly (3), and then lift it off the computer (4).
7. Lift the keyboard straight up and off the computer.
Reverse this procedure to install the keyboard.
NFC board
Before removing the NFC board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
Service cover on page 37).
5. Remove the battery (see
Battery on page 39),
70 Chapter 4 Removal and replacement procedures