Filter
Top Products
Hardware options installation 50
5.
Press the optical drive blank release latches, and then pull the blank out of the drive bay.
Retain the blank for future use.
6. Install the optical drive into the bay.
7. Connect the optical drive SATA Y-cable:
a. Connect the common end of the Y-cable to the optical drive.
b. Connect the power end of the Y-cable to the power supply cable labeled P3.
c. Route the data end of the Y-cable through the left side chassis opening down to the system board.
d. Connect the data end of the Y-cable to the system board SATA connector.