Filter
Top Products
Configure Media 2-9
Unload Media To unload media (raise the pinch rollers and switch off the platen
vacuum), press the Unload Media key on the Front Page screen,
or press the Load/Unload switch on the back of the printer to the
Unload position.
Reload Media If the control panel displays the media type you intend to use,
press the Reload Media key (or press the Load/Unload switch to
the Load position, or press the optional foot switch).
• If you are reloading roll-fed media, see “Load and Print on
Roll-Fed Media” on page 2-15.
• If you are reloading rigid media, press either the Reload
Sheet or Reload and Print key. Reload and Print switches
the printer Online after it is complete, so it can immediately
accept the next print job. Reload Sheet does not switch the
printer Online. Then see “Load and Print on Rigid Media” on
page 2-10.
Media Wizard To view or change the settings for the currently-loaded media,
press the media listing area (upper left corner) of the Front Page
screen. This displays the Media Wizard.
The Media Wizard also lets you create a new media type, delete
an existing media type, view the settings for any media type, or
change the order in which the media are listed in the Media
Wizard.