Filter
Top Products
Menus 3-7
Menus The printer’s less-often used functions are accessed via the
menus. The printer has these menus and functions:
• Calibrate Printer (see below)
• Printer Settings (page 3-8)
• Tools (page 3-12)
• Warnings & Actions (page 3-14), shown in Expert Messages
Mode only
• Print Menus (page 3-13)
• Service Menus — for use by factory, technical support, and
authorized service providers
Calibrate Printer To display this menu, press the Calibrate button on the Front
Page screen. For instructions on using these options, see Chap-
ter 4, Calibrating the Printer.
• Auto Calibrations — see “Auto Calibrations” on page 4-6
for instructions.
• Auto Bidi Calibration — ensures that every working jet
fires a pixel at precisely the same location, in both direc-
tions of travel
• Auto H2H Calibration — aligns the printheads relative to
each other
• AutoJet Calibration — locates and substitutes missing
jets for working jets
• Full AutoSet — runs AutoJet, AutoBiDi, and AutoH2H in
sequence
• AutoSet Summary — when enabled, a table of the results
of the Full AutoSet calibration is printed after the AutoSet
test patterns. When you enable the AutoSet Summary,
you can show or hide the detailed calibration data.