Filter
Top Products
Removal and replacement procedures 42
3.
Disconnect the power cord from the server.
4. Open the front bezel (on page 24).
5. Remove all drives ("LFF non-hot-plug drive" on page 31) and drive carriers ("Drive carrier" on page
30).
6. If the chassis cover was not removed in step 4, remove it ("Remove the chassis cover" on page 26).
7. Open the left and right side chassis cable clips to allow the drive cable removal.
o Right side cable clip
o Left side cable clip
8. Disconnect the drive power cable:
a. If installed, remove the optical drive ("Optical drive" on page 33).
b. Pull the drive power cable out from the top chassis opening.